PPPoE status:

  1. telnet redback-manage.turbonet.com
  2. tony@local
  3. pink
  4. enable
  5. pink
  6. context SkyLink
  7. show pppoe

 

To kill a PPPoE account by hand.

  1. Telnet
  2. open redback-manage.turbonet.com
  3. tony@local
  4. pink password
  5. enable
  6. pink password
  7. context SkyLink
  8. show subscriber active
  9. clear subscriber xxxx

Logging into the radio

  1. In a web page, type the radio's IP in the address line as xxx.xxx.xxx.xxx/admin
  2. Click the + before Access Point, then click the 2.4 GHz
  3. Click Connected Clients
  4. In Details, the RSSI can go up to 54.  The Modulation Rate should be 6 or above for a fast connection.  802.11b will get 1, 2, 5.5 (6) or 11.
  5. If you're in G mode, it must be above 6 for a good connection.
  6. If you're in B mode, it must be above 1 for a good connection.