Installing D-link ISA card with Windows '95:

• Write down the network address and interrupt it tells you.
• It will reboot the machine.
• Shut the machine down.
• Install the card now.
• Boot the machine. Be very sure, when it prints "Starting Windows '95" to hit "F8" (there are two seconds!)
• Safe-mode, command prompt only.
• Put in the floppy disk.
• Change to the a: drive
• cd utility
• run "setup"
• hit "enter", then choose something like "setting up the configuration of the card".
• disable PnP, set the address and interrupts.
• f2 to save and exit.
• It will reboot - let it go into '95.
• Go to the control panel into networks and tell it the protocols you need.